SYNCTHING(1)

NAME
syncthing - Syncthing

SYNOPSIS

syncthing [-audit] [-auditfile=<file|-|-->] [-browser-only] [device-id]
          [-generate=<dir>] [-gui-address=<address>] [-gui-apikey=<key>]
          [-home=<dir> | -config=<dir> -data=<dir>]
          [-logfile=<filename>] [-logflags=<flags>]
          [-no-browser] [-no-console] [-no-restart] [-paths] [-paused]
          [-reset-database] [-reset-deltas] [-unpaused] [-upgrade]
          [-upgrade-check] [-upgrade-to=<url>] [-verbose] [-version]

DESCRIPTION

Syncthing lets you synchronize your files bidirectionally across multiple devices. This means the creation, modification or deletion of files on one machine will automatically be replicated to your other devices. We believe your data is your data alone and you deserve to choose where it is stored. Therefore Syncthing does not upload your data to the cloud but exchanges your data across your machines as soon as they are online at the same time.

OPTIONS

-audit
    Write events to timestamped file audit-YYYYMMDD-HHMMSS.log.

-auditfile=<file|-|-->
    Use specified file or stream ("-" for stdout, "--" for stderr) for audit events, rather than the timestamped default file name.

-browser-only
    Open the web UI in a browser for an already running Syncthing instance.

-device-id
    Print device ID to command line.

-generate=<dir>
    Generate key and config in specified dir, then exit.

-gui-address=<address>
    Override GUI listen address. Set this to an address (0.0.0.0:8384) or file path (/var/run/st.sock, for UNIX sockets).

-home=<dir>
    Set common configuration and data directory. The default configuration directory is $HOME/.config/syncthing (Unix-like), $HOME/Library/Application Support/Syncthing (Mac) and %LOCALAPPDATA%\Syncthing (Windows).

-config=<dir>
    Set configuration directory. Alternative to -home and must be used together with -data.

-data=<dir>
    Set data (e.g. database) directory. Alternative to -home and must be used together with -config.

-logfile=<filename>
    Set destination filename for logging (use "-" for stdout, which is the default option).

-logflags=<flags>
    Select information in log line prefix. The -logflags value is a sum of the following:

•   1: Date

•   2: Time

•   4: Microsecond time

•   8: Long filename

•   16: Short filename

    To prefix each log line with date and time, set -logflags=3 (1 + 2 from above). The value 0 is used to disable all of the above. The default is to show time only (2).

-no-browser
    Do not start a browser.

-no-console
    Hide the console window. (On Windows only)

-no-restart
    Do not restart Syncthing when it exits. The monitor process will still run to handle crashes and writing to logfiles (if configured to).

-paths
    Print the paths used for configuration, keys, database, GUI overrides, default sync folder and the log file.

-paused
    Start with all devices and folders paused.

-reset-database
    Reset the database, forcing a full rescan and resync. Create .stfolder folders in each sync folder if they do not already exist. Caution: Ensure that all sync folders which are mountpoints are already mounted. Inconsistent versions may result if the mountpoint is later mounted and contains older versions.

-reset-deltas
    Reset delta index IDs, forcing a full index exchange.

-unpaused
    Start with all devices and folders unpaused.

-upgrade
    Perform upgrade.

-upgrade-check
    Check for available upgrade.

-upgrade-to=<url>
    Force upgrade directly from specified URL.

-verbose
    Print verbose log output.

-version
    Show version.

EXIT CODES

0   Success / Shutdown

1   Error

2   Upgrade not available

3   Restarting

4   Upgrading

    Exit codes over 125 are usually returned by the shell/binary loader/default signal handler. Exit codes over 128+N on Unix usually represent the signal which caused the process to exit. For example, 128 + 9 (SIGKILL) = 137.

PROXIES

Syncthing can use a SOCKS, HTTP, or HTTPS proxy to talk to the outside world. The proxy is used for outgoing connections only - it is not possible to accept incoming connections through the proxy. The proxy is configured through the environment variable all_proxy. Somewhat unusually, this variable must be named in lower case - it is not “ALL_PROXY”. For example:

$ export all_proxy=socks://192.0.2.42:8081

DEVELOPMENT SETTINGS

The following environment variables modify Syncthing’s behavior in ways that are mostly useful for developers. Use with care. If you start Syncthing from within service managers like systemd or supervisor, path expansion may not be supported.

STTRACE
    Used to increase the debugging verbosity in specific or all facilities, generally mapping to a Go package. Enabling any of these also enables microsecond timestamps, file names plus line numbers. Enter a comma-separated string of facilities to trace. syncthing -help always outputs an up-to-date list. The valid facility strings are:

Main and operational facilities:

config
    Configuration loading and saving.

db  The database layer.

main
    Main package.

model
    The root hub; the largest chunk of the system. File pulling, index transmission and requests for chunks.

scanner
    File change detection and hashing.

versioner
    File versioning.

Networking facilities:

beacon
    Multicast and broadcast UDP discovery packets: Selected interfaces and addresses.

connections
    Connection handling.

dialer
    Dialing connections.

discover
    Remote device discovery requests, replies and registration of devices.

nat NAT discovery and port mapping.

pmp NAT-PMP discovery and port mapping.

protocol
    The BEP protocol.

relay
    Relay interaction (strelaysrv).

upnp
    UPnP discovery and port mapping.

Other facilities:

fs  Filesystem access.

events
    Event generation and logging.

http
    REST API.

sha256
    SHA256 hashing package (this facility currently unused).

stats
    Persistent device and folder statistics.

sync
    Mutexes. Used for debugging race conditions and deadlocks.

upgrade
    Binary upgrades.

walkfs
    Filesystem access while walking.

all All of the above.

STBLOCKPROFILE
    Write block profiles to block-$pid-$timestamp.pprof every 20 seconds.

STCPUPROFILE
    Write a CPU profile to cpu-$pid.pprof on exit.

STDEADLOCKTIMEOUT
    Used for debugging internal deadlocks; sets debug sensitivity. Use only under direction of a developer.

STDEADLOCKTHRESHOLD
    Used for debugging internal deadlocks; sets debug sensitivity. Use only under direction of a developer.

STGUIASSETS
    Directory to load GUI assets from. Overrides compiled in assets. Useful for developing webgui, commonly use STGUIASSETS=gui bin/syncthing.

STHASHING
    Specify which hashing package to use. Defaults to automatic based on performance. Specify “minio” (compatibility) or “standard” for the default Go implementation.

STHEAPPROFILE
    Write heap profiles to heap-$pid-$timestamp.pprof each time heap usage increases.

STNODEFAULTFOLDER
    Don’t create a default folder when starting for the first time. This variable will be ignored anytime after the first run.

STNORESTART
    Equivalent to the -no-restart flag

STNOUPGRADE
    Disable automatic upgrades.

STPROFILER
    Set to a listen address such as “127.0.0.1:9090” to start the profiler with HTTP access, which then can be reached at http://localhost:9090/debug/pprof. See go tool pprof for more information.

STPERFSTATS
    Write running performance statistics to perf-$pid.csv. Not supported on Windows.

STRECHECKDBEVERY
    Time before folder statistics (file, dir, … counts) are recalculated from scratch. The given duration must be parseable by Go’s time.ParseDuration. If missing or not parseable, the default value of 1 month is used. To force recalculation on every startup, set it to 1s.

GOMAXPROCS
    Set the maximum number of CPU cores to use. Defaults to all available CPU cores.

GOGC
    Percentage of heap growth at which to trigger GC. Default is 100. Lower numbers keep peak memory usage down, at the price of CPU usage (i.e. performance).

SEE ALSO

syncthing-config(5), syncthing-stignore(5), syncthing-device-ids(7), syncthing-security(7), syncthing-networking(7), syncthing-versioning(7), syncthing-faq(7)

AUTHOR
The Syncthing Authors

COPYRIGHT
2014-2019, The Syncthing Authors